EASY SCALE Hot Tub Descaler Kit – Fix and Prevent E02 Errors – for Lay Z Spa Hydrojet 2021 Onwards (4-Pipe)
£35.99
The EASY SCALE Hot Tub Descaler Kit is designed for Lay-Z-Spa Hydrojet (2021 onwards, 4-pipe models) to fix and prevent E02 errors caused by limescale buildup. This full kit includes instructions, a sachet of OUST descaling solution, and links to video guides. It improves pump efficiency, reduces noise, and is perfect for pump testing during repairs.
| Weight | 0.38 kg |
|---|---|
| Dimensions | 31 × 15 × 5 cm |
EASY SCALE Hot Tub Descaler Kit – Fix and Prevent E02 Errors for Lay-Z-Spa Hydrojet 2021 Onwards (4-Pipe Models)
The EASY-SCALE Hot Tub Descaler Kit is the ultimate solution for fixing and preventing E02 errors in Lay-Z-Spa Hydrojet models from 2021 onwards (4-pipe models). Designed to eliminate limescale buildup, this kit ensures that your spa’s pump and heater operate at maximum efficiency, significantly improving water flow and preventing long-term damage to essential components.
Key Features:
- Fixes and Prevents E02 Errors: E02 errors are commonly caused by limescale obstructing water flow through the pump and heater. The EASY SCALE Hot Tub thoroughly describes these components, preventing errors and restoring smooth operation.
- Quick and Simple to Use: With its user-friendly design, this kit makes descaling effortless. Simply disconnect the pump, attach the descaler, and flush away the limescale. No special tools are required—just follow the included instructions.
- Quieter Pump: Removing limescale reduces pump noise, resulting in quieter operation and a more relaxing spa experience.
- Improves Heating Efficiency: Limescale reduces water flow and forces the heater to work harder, consuming more energy. The EASY SCALE Hot Tub improves heating efficiency, saving you money on energy costs and extending the lifespan of your heater.
- Complete Kit: The kit includes everything you need—easy-to-follow instructions, a sachet of OUST (or similar descaling agent), and links to helpful instructional videos to guide you through the process.
- Robust Design: Built to last, the EASY SCALE Hot Tub can be used multiple times, making it a cost-effective solution for ongoing maintenance.
Always use a suitable descaling solution or tablets and follow the manufacturer’s safety instructions.
Ensure the tub is capped off on the inside using the caps provided with your tub.
Switch off the pump and remove the pump from the tub.
Screw the big fitting onto your EASY SCALE Hot Tub middle fitting, hand tight only. Smear a little washing-up liquid/cooking oil on all fittings, and push the small fitting into the bottom left fitting of the pump using a wiggling/twisting action. Do the same with the big blanking plug (bottom right) This may need a little force to ensure a snug fit.
Attach the EASY SCALE Hot Tub to the pump (top left fitting) offer up the bottom left fitting and tighten (hand tight only).
Start to fill the descaler. Tilt the pump backward to expel any air. Top up descaler (you will need approx. 2 liters of water in total so far).
Switch on the pump. Top up the descaler again to just above the fittings, about 2” from the top. Test for leaks, tighten fittings, and caps if necessary, and add a descaler solution (Oust or similar).
Run the pump for a minimum of 30 minutes on the heat, (30°C), longer if you want. There is no such thing as ‘over-descaling’ a hot tub pump.*** Do not allow the pump (water) temperature to exceed 40°C *** If you do, you’ll encounter an E08 (high temp) error. If this occurs, reset the RCD, switch it back on, carry out a thermal reset on the pump (push the button halfway up the pump), and reduce the temperature accordingly. The water may turn rather milky – a good thing – the milkier the solution, the more limescale you are removing.
Place an empty jug under the bottom drain. Undo the cap, allowing the solution to empty into the jug. Repeat with the blanking plug (bottom right) and let the remaining solution run into the same jug, refit the blanking plug, and cap. Fill EASY-SCALE™ with clean fresh water and rinse thoroughly (repeat steps 5 to 7) for a minimum of 5 minutes.
Remove EASY-SCALE™. Pop the blanking plug and small fitting in your EASY SCALE Hot Tub ready for next time.
Refit the pump to the tub; remove caps from the inside of the tub. Switch on the pump and enjoy once again.
Use 3-4 times a year to prolong the life of the pump and internal components.
More frequent / repeat treatments / leaving overnight may be needed in exceptionally hard water areas;
There is no such thing as over-descaling a Lay Z Spa pump!
Reviews
There are no reviews yet.