Hot Tub Descaler kit For MSpa hot tubs – Fix and Prevent E1 errors – EASY-SCALE (TM)
£34.99
| Weight | 0.54 kg |
|---|---|
| Dimensions | 31 × 15 × 5 cm |
Hot Tub Descaler kit – For MSpa Hot Tubs – Fix and Prevent E1 Errors – EASY-SCALE
The EASY-SCALE Hot Tub Descaler Kit is a must-have for MSpa hot tub owners experiencing E1 error codes, which are commonly caused by limescale buildup in the pump, heater, and internal components. This innovative descaler ensures your tub runs more efficiently by removing limescale and improving water flow.
Key Benefits:
- Fix and Prevent E1 Errors: The EASY-SCALE™ Hot Tub Descaler kit kit is designed to address E1 error codes, which typically result from limescale affecting your hot tub’s pump and heating elements. By descaling these critical parts, the kit restores proper function and prevents future issues.
- Quieter and More Efficient Pump: Limescale buildup can make pumps noisy and less effective. This descaler eliminates limescale, leading to a quieter and more efficient pump operation.
- Compatible with Chlorine and Bromine: Safe to use with both chlorine and bromine sanitizers, offering flexibility for your preferred chemical treatment.
- Quick and Simple to Use: The Hot Tub Descaler kit is easy to install and operate. Simply turn off and remove the pump, attach the EASY-SCALE™, and flush away the limescale. It’s that simple to bring your pump back to peak performance.
Additional Features:
- Improves Heating Efficiency: By removing limescale, the Hot Tub Descaler kit significantly enhances water flow and heating efficiency, helping you save money on energy bills while extending the lifespan of your pump and heater.
- Leak Testing: The EASY-SCALE is also useful for testing used pumps for leaks when removed from the tub, ensuring everything is in top condition before reinstallation.
- Future-Proof Design: If you upgrade your hot tub, you don’t need a new descaler. Just purchase the appropriate fitting kit for your new model.
Included with your EASY-SCALE™ kit are 2 screw-on caps, a short and long pump adapter,
a pre-assembled pipe fitting kit and a sachet of Oust (or similar) descaling solution.
(Oust not supplied with non-UK orders due to shipping restrictions).
Always rinse your EASY-SCALE thoroughly with clean fresh water before and after use.
Ensure tub is empty of water. Switch off pump. Remove filter from bottom fitting.
Using the wrench that came with your Hot Tub Descaler kit, undo and remove the 2 fittings that secure the pump to the tub (pic 1).
Screw the long adapter into the top right and the short adapter into the bottom left of the pump. DO NOT OVERTIGHTEN OR USE PLIERS AS THIS WILL DAMAGE THE THREADS. Screw your EASY-SCALE™ into the top (right) adapter (middle EASY-SCALE™ fitting) taking care to screw it on straight and not cross-threading the unit. Attach the pipe to the front (bottom) of your EASY-SCALE™ and the other end of the pipe onto the short adapter (bottom left). Ensure all fittings are tightened, including the caps, hand tight only.
Fill EASY-SCALE™ to about 2” below the top. Switch on pump and test for leaks (filter only), tighten fittings and / or caps if necessary. Add more water if needed, then the Oust (or similar).
Run pump for a minimum of 30 minutes on heat (30°C) *** DO NOT ALLOW THE WATER TEMPERATURE TO EXCEED 40°C *** – if this happens, simply reduce the heat accordingly. The water may turn rather milky – a good thing – the milkier the solution, the more limescale you are removing.
Switch off pump. Hold an empty jug under the bottom fitting. Undo the pipe (EASY-SCALE™ end) allowing the solution to empty into the jug.
Reattach the pipe, refill with clean fresh water. Repeat steps 5 and 6 for a minimum of 5 minutes.
Remove your EASY-SCALE™. Pop the adapters and pipe inside the EASY-SCALE™ ready for next time. Refit the fittings to the pump.
Replace the filter (if necessary) refill tub with water.
Switch on pump and enjoy once again.
Reviews
There are no reviews yet.